Manually Configuring your Modem-Router
Manually Configuring your Modem-Router
Making Configuration Changes
Configurable parameters have a dialog box or a drop-down list. Once
a configuration change has been made on a page, most times you will
need to click the “SAVE SETTINGS” or “NEXT” button at the bottom
of the page to enable the new setting. Some options may also have an
Note: To ensure proper screen refresh after a command entry, be sure
that Internet Explorer 5.0 and above is configured as follows: Under
the menu Tools/Internet Options/General/Temporary Internet Files/
Settings, the setting for “Check for newer versions of stored pages”
should be “Every visit to the page.”
Setup Wizard
After successfully logging into the Modem-Router, you will be
prompted with the following screen. You can quickly select your
country, add in your username and password for your ISP into the
Modem-Router. Once you have added all details correctly, click “Save
The status section shows:
• Line Status – detects if the telephone line has correct line sync
• Line Mode – This shows the current line mode, (G.DMT is common for
• Connected/NO Connection – Shows current Internet connection status
• WAN IP – This is the IP
page. The Main Menu links
interface contains 14 main
Sets the local time zone, the password for
administrator access, the IP address of a PC that
will be allowed to manage the Modem-Router
remotely, and the IP address of a Domain Name
Specifies the Internet connection settings.
Sets the TCP/IP configuration for the Modem-
Router LAN interface and DHCP clients.
Shares a single ISP account with multiple users,
Sets routing parameters and displays the current
Configures a variety of security and specialized
functions including: Access Control, URL blocking,
Internet access control scheduling, Intruder
Sets the ADSL operation type and shows the
