DCS-200 • User’s Guide 131
_K==oÉãçíÉ=`çåíêçä
DCS-200 Command List
a`pJOMM=`çãã~åÇ=iáëí
The table below lists DCS-200 remote commands.
Table B-3. DCS-200 Remote Commands
Command Description Page
Ethernet Commands
DHCP
Enable/Disable DHCP mode 134
EMAC
Get MAC Address 134
GATEWAY
Set gateway to be used when DHCP is OFF 135
IP
Set Static IP Address to be used when DHCP is OFF 135
SUBNET
Set subnet mask to be used when DHCP is OFF 135
Input Commands
ACQ
Input Source Acquire. Does a "force" acquire of the input 135
AUTOACQ
Auto Input Acquisition Mode 135
BACKGND
Set background color 136
BLKVID
Puts black into the scaler selected 136
CBLEQ
Set cable equalization 136
EDID
Set Input EDID Resolution 136
EDIDTYPE
Set EDID type 137
FREEZE
Freeze the input on program 137
IADJ
Selects the input path to adjust (preview or program) 137
IAR
Adjust Input Aspect Ratio 137
IAUTOC
Attempts to detect and adjust input video to the active video area 138
IAVAIL
Query only command for input availability 138
IBRT
Input brightness adjust 138
ICDEL
Delete Input Configuration 139
ICNT
Input contrast adjust 139
ICPHO
Input Phase Adjust 139
ICREC
Recalls saved input configuration for selected input 139
ICRST
Reset Input Configuration to default values 140
ICSAV
Saves Input Configuration 140
ICSP
Input Colorspace Adjust 140
IHATV
Input Horizontal Active Adjust 140
IHCROP
Input Horizontal Crop 141
