Installing CMS patches
Issue 1.0 December 2003 43
Installing CMS patches
If the new CMS load has any patches, those patches must be installed on the system.
These patches are on the CMS software CD-ROM, not the upgrade tool CD-ROM. The
CMS software CD-ROM is included in the upgrade kit.
If there are patches on the CMS software CD-ROM, it will be labeled similar to “CMS Patch
Issue 2.” If there are no patches on the CD-ROM, continue with Copying customer data
on
page 45.
If the CMS software CD-ROM does have patches, continue with this procedure.
To install CMS patches:
1. Enter:
cd /
2. Enter:
eject cdrom
3. Remove the upgrade tool CD-ROM. Save the CD-ROM for when you remove the
upgrade files.
4. Load the CMS software CD-ROM.
The File Manager window should open. Click the cursor in an XTERM window.
Note:
Note: If the File Manager window does not open, enter the following commands to
start the volume manager:
/etc/init.d/volmgt stop
/etc/init.d/volmgt start
The File Manager window will open. Click the cursor in an XTERM window.
5. After about 15 seconds, enter:
cmssvc
The CMS services menu is displayed.
6. Enter the number that corresponds to the load_all option.
