Features
To Set Up a Conference Call
1.
2.
3.
4.
5.
6.
7.
Make call to
first outside number
or
extension.
Press
Conf
after person answers.
The green light next to the line button flashes to signal that the person
is on hold, and the display prompts you to add the next participant.
To make the next call, press an
ICOM
or
SA
button for an inside
call or an
SA
or
line button
for an outside call.
Dial
number
or
extension;
after the person answers, press
Conf.
See Note.
All paticipants, including you, are connected. The display shows the
number of people on the call.
Press
Conf
again to add another person.
You are separated from the conference while you add the next person,
but participants are still able to talk. The display prompts you to add the
next participant.
Repeat steps 3, 4, and 5 for rest of participants.
To end conference, hang up.
Note:
If you make a dialing error while adding a participant to
a conference, you must hang up and start over.
To Leave a Conference Temporarily
1. Press
Hold.
Conference paticipants are still able to converse.
2. To rejoin conference, press
line button
of any participant.
5-16 Conference
