4.5 Mounting
Depending on the mounting option ordered, the following mounting
methods are available:-
Mounting strip (A) alone,
OR mounting strip (A) and optional pipe mounting bracket (B),
OR rear mounting frame (C) and pipe mounting bracket (B), which are
both optional items. This arrangement allows for vertical pipework behind
the boiler.
Note that when the pipe mounting bracket is used, the pipes can be
connected before installing the appliance.
C
B
B
4.5.1 Fitting the mounting strip
1. Fasten the mounting strip horizontally to the wall, using the screws
and plugs supplied.
2. Mount the appliance.
4.5.2 Fitting the mounting strip and the mounting bracket
1. Fasten the mounting strip and the pipe mounting bracket
horizontally to the wall according to the drilling pattern, using the
screws and plugs supplied.
4.5.3 Fitting the rear mounting frame
1. Fasten the frame vertically to the wall, using screws and plugs.
2. Fasten the optional pipe mounting bracket to the frame using the
fixings supplied.
Caution
The appliance is wider than the frame by 20mm.
16
