A SERVICE OF

logo

Chapter 5. RS-232 Commands
53
Adjust Audio Commands
The formula for Adjust Audio commands is as follows:
1. Command + Output + Number + Control + [Enter]
For example, to adjust the audio volume for output port 02 to level 11, type the
following:
volume o02 v11 [Enter]
The following tables show the possible values for commands:
Command Description
volume Adjust audio level (volume)
Output Command Description
o Output command
Output Port Number Description
yy 01-16 port (default is 01)
l1 Local output port
* All output ports
Address Description
a Device address
Device Number Description
zz 00-15 (default is 00)
* All devices
Control Description
vxx v = Volume
xx = Audio level 00-15 (default is 00)
Example: v10