PN0108 User Manual
20
SN0108 / SN0116 Browser Operation
Logging In
Remote operation of the PN0108 via a SN0108 / SN0116 is browser based. The
first step involves logging into the SN0108 / SN0116's web page, as follows:
Note: 1. The browser must support 128 bit SSL encryption.
2. You must set the port parameters on the SN0108 / SN0116 port that
the PN0108 connects to as follows: Bps: 384000; Data bits: 8; Parity:
None; Stop bits: 1; Flow control: None.
1. In the browser's URL location bar, specify the IP address of the SN0108 /
SN0116 that the PN0108 you want to access is connected to. (If you don't
know the IP address, get it from the SN0108 / SN0116 administrator.)
2. When the Security Alert dialog box appears, accept the certificate – it can
be trusted. (See Trusted Certificates, page 64, for details.)
3. A login dialog box, like the one below, appears:
4. Provide a valid Username and Password (set by the SN0108 / SN0116
administrator), then Click Login to continue.
