GB - 17
Discharge Chute
Discharge chute rotates 200°.
ALWAYS position discharge chute in safe
direction and angle, away from operator and
bystanders, before starting engine.
Discharge Chute Control (921002,
003, 004)
IMPORTANT: If chute does not stay in set
position, adjust as directed in SERVICE AND
ADJUSTMENTS on page 24, or repair before
operation.
Rotate the Chute with Discharge Chute
Control.
IMPORTANT: DO NOT force frozen chute
controls. If frozen, take to warm place until
controls are free.
Discharge Chute Crank (921001)
IMPORTANT: If chute does not stay in set
position, adjust as directed in SERVICE AND
ADJUSTMENTS on page 24, or repair before
operation.
Rotate the Chute with Discharge Chute
Crank.
IMPORTANT: DO NOT force frozen chute
controls. If frozen, take to warm place until
controls are free.
Heated Handles (921003)
Turn the heated handles
switch to the ON (1)
position to activate. Turn
the switch to the OFF (2)
position to deactivate.
Remote Wheel Lock (921002)
Squeeze and release the remote wheel lock
to lock the left wheel for better traction when
throwing snow or to unlock the left wheel for
easier steering.
NOTE: The wheel lock will not release when
under load. Do not unlock the wheel while
turning. If the wheel lock will not release, turn
the unit slightly left or right to relieve axle load
and release the axle lock.
If remote wheel lock does not lock or unlock
properly, adjust or repair before operation
(see Remote Wheel Lock (921002) on
page 24).
Figure 18
OS7105
921002, 003, 004
