A SERVICE OF

logo

134
Programming Commands
CR Couple Resolution Bandwidth
CR
Couple Resolution Bandwidth
Syntax
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
The CR command couples the resolution bandwidth to the span.
The counterpart to the CR command is the RB command (page 295) which breaks the coupling. Use the
CR command to re-establish coupling after executing an RB command.
NOTE CR uses the legacy instrument settings for resolution bandwidth only if Mode
Setup > Preferences> Limit RBW/VBW is set to ON.
CR
LF
CR
SP
,
;