Page 36 © 2002, ADTRAN, Inc. 64200600L1#T-31A
Total Access 600R User Interface Guide (UIG)
Filter Defines
The 600R can filter packets based on certain parameters within the packet. The method used by the
600R allows the highest flexibility for defining filters and assigning them to a PVC or PPP link. The fil-
ters are set up in two steps: (1) defining the filter types, and (2) applying them to a list under the PVC or
PPP configuration. This menu is used to define the individual filter defines based on packet type.
MAC FILTER DEFINES
The MAC filter is applied to bridge packets only. Bridge packets which are forwarded by the bridge
functionality of the Total Access 600R are defined here. Up to 32 MAC defines can be specified.
P
ATTERN
F
ILTER
D
EFINES
The pattern filter is applied to bridge packets only. That is any packet which is forwarded by the
bridge functionality of the Total Access 600R. Up to 32 pattern defines can be specified.
The
F
ILTER
D
EFINES
option applies to both Frame Relay and PPP applications.
N
AME
Identifies the filter entry. Default is no
entry in name field.
S
RC
A
DDR
48-bit MAC source address used for com-
parison. (hexadecimal format) Default is
00:00:00:00:00:00
.
SRC MASK
Bits in the MAC source address which are
compared. (hexadecimal format) Default
is
00:00:00:00:00:00
.
D
EST
A
DDR
48-bit MAC destination address used for
comparison. (hexadecimal format) Default
is
00:00:00:00:00:00
.
D
EST
M
ASK
Bits in the MAC destination address used
for comparison. (hexadecimal format)
Default is
00:00:00:00:00:00
.
TYPE
16-bit type field used for comparison.
(hexadecimal format) Default is
00:00
.
T
YPE
M
ASK
Bits in the type field used for comparison.
(hexadecimal format) Default is
00:00
.
N
AME
Identifies the filter entry. Default is no entry in name field.
O
FFSET
Offset from beginning of packet of where to start the pattern
comparison. Default is 0.
P
ATTERN
64 bits used for comparison. (hexadecimal format) Default is
00:00:00:00:00:00:00:00
.
M
ASK
Bits in the pattern to be compared. (hexadecimal format)
Default is
00:00:00:00:00:00:00:00
.
