Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice
5-64 61179641AL1-5C
NOTE
The Media Access Control (MAC) address is set at the factory.
Table 5-38. Dynamic IP Settings - for IP over Ethernet Menu Items
Option Description Function
N/A IP address This option cannot be changed. The IP address is
automatically retrieved from the DHCP server.
N/A Subnet mask This option cannot be changed. The Subnet mask is
automatically retrieved from the DHCP server.
N/A Default Gateway This option cannot be changed. The Default Gateway is
automatically retrieved from the DHCP server.
4 TFTP IP address This option is used to configure the TFTP IP address.
The TFTP IP Address must be configured to use TFTP for
software upgrade. The TFTP address is configured in
decimal dot format.
5 TL1 Port Number (set >1023) This field is used to configure the Transaction Language
1 Port Number. The default TL1 Port Number is 13001,
however, it can be modified to any number greater than
1023.
6 TL1 IP Transport type This option is used to configure the TL1 IP Transport
Type. Each time the TL1 IP Transport type option is
selected, the setting is toggled between User Datagram
Protocol (UDP) and Transmission Control Protocol (TCP).
The default is TCP.
7 Reset IP Factory Defaults This option displays the “Restore IP Factory Defaults
Menu” on page 5-65.
