B-4 61221002L2-5B
T1 MAINTENANCE MENU
From the Maintenance Menu, enter “20” to display the T1 Maintenance Menu as shown below.
T1 Maintenance Menu
1. ALW-MSG-T1
2. ALW-SW-T1
3. CONN-JACK-T1
4. DISC-JACK-T1
5. INIT-REG-T1
←←
←←
←
Clears the T1 PM data for the H2TU-C
6. INH-MSG-T1
7. INH-SW-T1
8. OPR-PROTNSW-T1
9. RLS-PROTNSW-T1
10. RMV-T1
11. RST-T1
12. RTRV-ALM-T1
13. RTRV-ATTR-T1
14. RTRV-COND-T1
15. RTRV-PM-T1
←←
←←
← Retrieve T1 PM data for the H2TU-C
16. SET-ATTR-T1
B. Maintenance Menu
M. Main Menu
INIT-REG-T1 Command
Input Format
The INIT-REG-T1 command is used to clear T1 PM data for the H2TU-C card.
<INIT-REG-T1
AID[ALL]= RT-1-21
←←
←←
← Slot of interest
MONTYPE[ALL]= MS, CVL, ESL, SESL, UASL, B8ZSSL, PDVSL
LOCN[]= NEND, FEND,
←←
←←
← Location to clear
TMPER[]= 1-DAY, 1-HR,
←←
←←
← Time periods available to clear
RTRV-PM-T1 Command
Input Format
The RTRV-PM-T1 command is used to retrieve T1 PM data for the H2TU-C card.
<RTRV-PM-T1
AID[ALL]= RT-1-21
←←
←←
← Slot of interest
MONTYPE[ALL]= MS, CVL, ESL, SESL, UASL, B8ZSSL, PDVSL
TMPER[]= 1-DAY, 1-HR,
←←
←←
← Time periods available to retrieve
MONDAT[]= Up to 2/8 days of PM data history depending upon facility. MM-DD && MD
MONTM[]= Up to 8/24 hours of PM data history depending upon facility. HH-MM && M
