A SERVICE OF

logo

214
C
HAPTER
9: M
ANAGING
LAN E
MULATION
Display LECS Status
Display the status of the LECS in the CoreBuilder 9000 ATM Enterprise
Switch. The status is either enabled or disabled.
Command Actions
Command Result
Example
Enter:
1 1 5 2 1
The following message is displayed:
LECS service status is ENABLED.
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(5) SLE: LE Setup
(2) LCS: LECS setup
(1) STA: Show LECS status
Direct access sequence:
1 1 5 2 1
System action taken:
The LECS status is displayed.
System message display:
LECS service status is <ENABLED/
DISABLED>.