ZyXEL Communications 2-slot XFP 10 GIgabit Module Model Vehicle User Manual


 
EM-422 User’s Guide
6
The following table describes the LEDs on the EM-422 panel.
4 Transceiver Removal
Use the following steps to remove an XFP transceiver.
1 Open the transceiver’s latch (latch styles vary).
2 Pull the transceiver out of the slot.
LED Color Status Description
LNK/
ACT
Blue On The port is connected to an Ethernet
device.
Blinking The port is transmitting or receiving data.
Off The port is not connected to an Ethernet
device.