Filter
Top Products
PSR-S970/S770 Owner’s Manual 39
Voices – Playing the keyboard –
1
Use the [PITCH BEND] wheel to bend notes up (roll the wheel away from you) or
down (roll the wheel toward you) while playing the keyboard. The Pitch Bend is
applied to all the keyboard parts (RIGHT 1, 2 and LEFT). The [PITCH BEND]
wheel is self-centering and will automatically return to normal pitch when released.
The maximum pitch bend range can be changed on the Mixing Console display:
[MIXER/EQ] TAB [E][F] TUNE [H] PITCH BEND RANGE.
Use the [MODULATION] wheel to apply modulation effects, such as vibrato, to
notes played on the keyboard. By default, this is applied to the keyboard parts
(RIGHT 1, 2 and LEFT). Moving the [MODULATION] wheel up (away from you)
increases the depth of the effect, while moving it down (toward you) decreases it.
You can set whether the effects caused by the [MODULATION] wheel will be
applied or not to each keyboard part independently: [FUNCTION] TAB [E]
MENU 1 [D] CONTROLLER TAB [F] KEYBOARD/PANEL [A]/[B] 2
MODULATION WHEEL.
Using the Wheels
Using the Pitch Bend Wheel
NOTE
• The effects produced by using the
[PITCH BEND] wheel may not be
applied to the LEFT part during Style
playback, depending on the Style
setting.
• (PSR-S970) The effects produced by
using the [PITCH BEND] wheel are
not applied to the Vocal Harmony
effect.
Using the Modulation Wheel
NOTE
Depending on the selected Voice, the
[MODULATION] wheel may control
volume, filter or some other parameter
instead of vibrato.
NOTE
To avoid accidentally applying modu-
lation, make sure the [MODULATION]
wheel is set at minimum (down) posi-
tion before you start playing.
NOTE
The effects produced by using the
[MODULATION] wheel may not be
applied to the LEFT part during Style
playback depending on the Style set-
ting.
12psrs970_en_om.book Page 39 Friday, June 26, 2015 3:33 PM