Filter
Top Products
PSR-S970/S770 Owner’s Manual 57
Styles – Playing Rhythm and Accompaniment –
2
3 Press the [EXIT] button to close the CHANNEL ON/OFF display.
You can adjust the volume balance between the parts (Song, Style, LEFT, RIGHT 1/2, etc.).
1 Press the [BAL.] button once or twice to call up the desired
page of the BALANCE display which contains the desired
channel.
There are two pages, 1/2 and 2/2.
2 Use the [1 ] – [8 ] buttons to adjust the volume of the
desired parts.
In the BALANCE 1/2 page, you can adjust the volume balance between the
Song (page 62), Style, Multi Pad (page 76), microphone (or guitar) and
keyboard parts (LEFT, RIGHT1 and 2).
In the BALANCE 2/2 page, you can adjust the volume balance between the
Song (MIDI), Audio (page 71), sound input from the [AUX IN] jack, and all
keyboard parts (KBD). For information on the [2 ] – [3 ] buttons, refer
to page 74.
3 Press the [EXIT] button to close the BALANCE display.
To change the Voice for each channel
Press one of the [1 ] – [8 ] buttons corresponding to the desired channel to call up the Voice Selection display
(page 36), then select the desired Voice.
NOTE
The Audio channel does not have a Voice and, hence, cannot be changed.
NOTE
You can also turn Style channels on/
off for dynamic effect by using the LIVE
CONTROL knobs. For instructions on
how to assign the functions to the
knobs, refer to page 40.
Adjusting the Volume Balance Between the Parts
2
NOTE
• You can also control the volume bal-
ance between the parts by using the
LIVE CONTROL knobs. For instruc-
tions on how to assign the functions
to the knobs, refer to page 40.
• On the VOL/VOICE page of the MIX-
ING CONSOLE display (page 95),
you can adjust the volume for the
Song and Style parts independently.
NOTE
When the UD-WL01 USB Wireless
LAN adaptor is connected to the
instrument, “WLAN” appears in the
BALANCE 2/2 page, and the volume of
the audio input via an iPhone/iPad
application tool (page 102) can also be
adjusted.
12psrs970_en_om.book Page 57 Friday, June 26, 2015 3:33 PM