Filter
Top Products
Operation
23
3. If you are using an external fuel tank,
connect the fuel joints securely and
squeeze the primer pump with the outlet
end up until you feel it become firm (if
equipped the fuel joint).
EMU27490
Starting engine
EMU27505
Manual start models (tiller control)
1. Place the gear shift lever in neutral.
NOTE:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2. Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg. Then install the lock plate on
the other end of the lanyard into the en-
gine stop switch.
WARNING
EWM00120
●
Attach the engine stop switch lanyard
to a secure place on your clothing, or
your arm or leg while operating.
●
Do not attach the lanyard to clothing
that could tear loose. Do not route the
ZMU02681
ZMU02680
ZMU02679
ZMU02894
N
ZMU02682