Filter
Top Products
Operating AC Appliances
16
Operating Several Appliances at Once
You can run several AC appliances if the total rating of all the
appliances (in watts) does not exceed 240 W. Run time,
however, will decrease accordingly with the number of
appliances being operated and the AC power being
consumed.
Operating an AC Appliance
Before operating your AC appliance, ensure that the battery
of the XPower Powerpack is fully charged. See “Recharging
with the AC Charger” on page 11 for details.
To operate an AC appliance:
1. Turn the AC Power On/Off Switch to the ON position.
The switch illuminates to indicate AC power is available
at the AC power outlets.
2. Remove the protective cover on the AC power outlets.
3. Plug the AC appliance into an AC power outlet and turn
the appliance on. XPower Powerpack will operate most
devices rated up to 240 W.
4. Recharge the XPower Powerpack as soon as possible
after each use.
When using the XPower Powerpack to operate an AC
appliance and the low battery warning sounds, the warning
gives you time to shut your AC appliance off before loss of
AC power.
If you ignore the warning, the XPower Powerpack
automatically turns off a few minutes later to prevent battery
damage.
In the event of an overload, low battery voltage or
overheating, the XPower Powerpack automatically shuts
down.