Filter
Top Products
T3260pr-0920
10
• Fit the remaining lock nut onto the end of the steering column.
• Tighten the lock nut with the assembly tool.
Lock Nut
• “Snap” the steering wheel cap into the center of the
steering wheel.
Steering
Wheel Cap
End of Steering Column
10
11
ASSEMBLY
• First, “snap” the front of the seat to the vehicle
A
.
• Next, “snap” the four tabs near the back of the seat into the
matching slots in the vehicle
B
.
• Position both seat belts so that the fasteners face each other,
as shown.
• Fit the folded end of each short seat belt down through the
outer slots in the seat. Do not insert the folded tab into the
slot. Pull up on each seat belt to make sure it is secure.
Seat Belt
Fasteners
12
13
B
SIDE VIEW
A
Folded Tab
Folded Tab
Folded End
Folded End