Filter
Top Products
7
5. Repeat the steps above to attach
the spiral ramp with the number “4”
engraving. Ensure the piece fits
snugly onto the two support pieces.
6. Attach the spiral ramp with the
number “5” engraving on the bottom
to the number “4” spiral ramp; repeat
the above steps to attach the tower
roof, labeled with a number “6” into
place.
7. Insert the tower sign into the slots on
the tower roof. Attach the spinner to
the gate. Then insert the gate into the
slots on the tower base.
Assemble the car wash:
Attach the car wash piece to the car wash base track. After that,
connect the car wash to the spiral tower using the ramp track with
the number “7” engraving. Attach the ramp track with the number
“8” engraving to the car wash platform.
Assembly Instructions