Filter
Top Products
6
Insert another yellow cylinder and
one wheel onto the open end of the
axle. Please be sure the deeper hole
in the wheel faces out, and the larger
end of the yellow cylinder goes inside
the body. Maneuver the cylinder until
it locks into place.
Cover with a fastener, with the spindle
side up and aligned with the hole
in the axle, then insert the spindle
through the hole in the axle. Put a
cover over the fastener, aligning the
holes in the cover with the holes in the
fastener. Insert two screws into the
cover and tighten with a screwdriver.
Repeat this process for the second
wheel.
2. To attach the left and right handle
bars to the dashboard activity panel,
insert them into the holes on the
sides. You will hear a loud ‘click’
sound. This indicates that the handle
bars are securely fixed into the
dashboard activity panel.
Product Assembly