Filter
Top Products
D
D
e
e
f
f
i
i
n
n
i
i
t
t
i
i
o
o
n
n
s
s
Entry point: A door or gate allowing access into a secure or controlled area.
CAN Communications: A highly reliable two wire communications protocol developed for the
automotive industry.
26 bit Wiegand format: The industry standard data output of access control card readers.
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
Step 1. Unlock and open the AES-2000 front panel.
Step 2. Disconnect the power to the AES-2000.
Step 3. Remove the (4) screws holding the inner shroud and remove the shroud (see diagram A).
Step 4. Disconnect all cables to the control board.
Step 5. Remove the (4) mounting posts holding the control board (see diagram B).
Step 6. Lift off the control board and set it aside.
Step 7. Place provided 3/16” metal spacers over the three threaded studs. (see diagram C).
Step 8. Mount the AES-NET board onto the studs using the #4 nuts provided (see diagram D).
Step 9. Re-mount the AES-2000 control board back onto the panel.
Step 10. Connect all cables. The AES-NET control cable connects to J9 on the AES-2000 main board. Replace the inner shroud,
being careful not to pinch any wires. .
Step 11. Reconnect the power to the AES-2000
Diagram A
Diagram B
Diagram C
Diagram D
2
1
4
3
6
5
8
7
J9
18
J2
J1
C
1124
VIKING
Model: xxx
Viking Electronics, Inc. (715)386-8861
1531 Industrial St., Hudson, WI 54016
S/N: XXXXXX
P/N: xxxxxxx