Filter
Top Products
11
Advanced Operation (cont’d)
II. Get to Know the Main Menu
Camera Setup - Turn Camera(s) On/Off
1. Use ◄ / ► to select the camera
you want to turn off.
2. Press OK to change ON/OFF
status.
# Make sure available cameras are set to
ON for SCAN or Quad mode.
Camera Setup - Camera Scan Period
Pairing - Pairing a Camera
1. Use ◄ / ► to change Scan Time
interval from OFF/5 sec/15 sec/
Quad.
2. Press OK to confirm the settings.
# To leave Quad display, simply press
directional keys to enter single channel
view.
= CAM1; = CAM2;
= CAM3; = CAM4;
# When the system enters into power
save mode from Quad, press any key to
resume monitor view.