Filter
Top Products
TOPCOM Baby Bottle Warmer 301 5
TOPCOM Baby Bottle Warmer 301
ENGLISH
4 Getting started
4.1 Baby Bottle Warmer
• Remove every accessory from the unit.
• Pour the 100ml water into the warming basin .
• Put the baby bottle with milk (240 ml) into the warming basin .
• Turn the thermostat t o 70°C.
• The water will warm up and this will heat the baby bottle.
• After 10 minutes, the milk will be about 40°C.
• Remove the bottle from the warmer and check the milk temperature.
• Disconnect the power after use. Let the device cool down and remove
the water.
Changing the thermostat temperature will influence the warming
time. The higher the temperature, the quicker the bottle will warm.
– 240ml, starting from fridge temperature (7°C) will take +/- 10 minutes (thermostat 70°C).
– 150 ml, starting from room temperature (20°C) will take +/- 7 minutes (thermostat 70°C).
Rol the bottle between your two hands to spread the temperature in the bottle. Do not shake!
Always check that the food temperature by testing some on the back of your hand.
4.2 Sterilizer
• Pour the 50ml water into the warming basin .
• Put a baby bottle, teat or pacifier into the warming basin.
• Install the food cup upside down on top of the warming basin .
• Turn the thermostat to 100°C.
• The heating element will heat the water to a 100°C and creates steam.
• It will need 15 minutes to sterilize the baby bottle, teat or pacifier.
• Disconnect power.
• Remove the food cup and remove the baby bottle, teat or pacifier.
The sterelized items can be extremely hot. Do not remove them with
bare hands as this may cause burn injuries.
Wash bottles, teats and pacifiers in warm water prior to sterilization.
40°
C
70°C
100°C
OFF
150ml
120ml
90ml
60ml
30ml
100ml
4
4
6
40°C
70°C
100°C
OFF
90ml
60ml
30ml
30ml
4
3
4
6
3
UntitledBook1.book Page 5 Wednesday, November 26, 2008 2:32 PM