Filter
Top Products
19
Let’s help to protect the environment!
• Your appliance contains many materials that can be reused or recycled.
• Take it to a collection point or to an authorised service centre so that
it can be processed.
Night light function - fig. F :
This function is optional. To use it, press button 3 :
this turns on the night light, which switches off and on automatically when the transmitter detects a sound.
To turn off this function, press button 3 again.
Receiver
It is portable. Clip 7 can be used to attach it to your belt, for example.
Starting up:
To start the receiver, select channel A or B using button
4 - fig. E.
Adjust the volume with button 11.
- I
f indicator lamps 5 and 10 light up steadily, the appliance is monitoring.
-
If the red indicator lamps 9 light up, the receiver is detecting sound.
-
If the receiver beeps, the transmitter signal been lost (it is switched off, on
the wrong channel or out of range).
-
If the recharging indicator lamp 5 is red, the batteries are low.
Place the receiver on its recharging base.
The baby monitor transmits the sound from the room where the baby is.
If there is no sound, the appliance goes into monitor mode. When a sound is
detected, it is transmitted and the red indicator lamps for sound level light
up. Their number is proportional to the intensity of the sound transmitted.
The transmitter waits for a minimum sound threshold before transmitting.
If you want to switch the sound off and just use the visual alarm: lower the
sound level to the minimum with the volume adjustment 11.
Turn switch
4 to OFF on the transmitter and on the receiver to turn the
appliance off.
Maintenance
Clean with a slightly damp cloth without detergents.
Do not let water get inside the appliances.
Caution: to operate,
the transmitter and the
receiver must be set on
the same channel.
GB
215028 Notice BBphone.indd 15 15/03/07 17:38:58