Filter
Top Products
www.svat.com
INSTALLING THE CAMERA (TANSMITTER)
1. Unpack the camera.
2. For optimal performance please follow these steps accordingly.
Mount the camera between 8-13 feet above the area to be monitored.
The camera has 8 IR LEDs, for day use turn off the LEDs by sliding the night
vision switch (on the right side of the camera head) to the OFF position.
SUN for day and MOON for night vision.
3. Connect the supplied 9V power adapter to the camera.
*WARNING: USE OF ANY OTHER ADAPTOR MAY CAUSE DAMAGE TO THE SYSTEM*
NOTE: Camera is also battery operable (rechargeable battery pack is sold seperatley GX515B)
4. To avoid problems with false sound trigger, adjust
the sound trigger level by tuning the TRIGGER
LEVEL TUNER (on the top right hand side of the
camera head)
5. Select the transmission channel found on the bottom
of the camera head by sliding switch to position
1,2 or 3. * When using more than one camera
ensure that each camera is set to a different
channel.*
6. The camera (transmitter) installation is now complete.
SLIDE SWITCH
SET TO NIGHT
VISION ON
SLIDE SWITCH
SET TO NIGHT
VISION OFF
TRIGGER TUNER
SET TO TRIGGER LEVEL
RIGHT SIDE VIEW
OF THE CAMERA
1 2 3
1 2 3 1 2 3
Set channel 1
position
Set channel 2
position
Set channel 3
position