Filter
Top Products
www.soehnle-professional.com
18
4. FAULTS
4. FAULTS 4. FAULTS
4. FAULTS –
––
–
CAUSES AND REMEDIES
CAUSES AND REMEDIESCAUSES AND REMEDIES
CAUSES AND REMEDIES
DISPLAY
DISPLAYDISPLAY
DISPLAY
REMEDY
REMEDYREMEDY
REMEDY
Underload: only dashes appear at the
bottom of the display field.
Switch the scales off and then on
again. The zero point is reset
automatically.
Overload: only dashes appear at the top
of the display field. Maximum weighing
range is exceeded.
Remove part of the weighed
goods from the scales, or switch
the scales off and then on again.
The zero point is reset
automatically.
Scales not stabilised when resetting. Test the scales with a force shunt.
If you are unable to correct the fault or if other error messages appear, please contact your service
partner.