Filter
Top Products
-10-
Figure 10. Using mounting holes as drill guides.
Mounting, Cont.
1. Plan the placement of the mortiser. Take
measurements of the base and layout a pen-
cil
drawing for the best location on the work
bench. See
Figure
9.
2. Seek assistance and lift the mortising
machine to the workbench. Lift the mor-
tising machine from its base, only. Slide it
over the pencil layout. Recheck for proper
working clearance and adjust as needed.
The mortising machine may be secured with
5
⁄16"
lag bolts or through bolts with washers and nuts
(not supplied).
3. Use
the mounting holes in the base as drill
guides and drill holes.
See Figure 10.
Drill a
1
⁄4" hole for
5
⁄16" lag bolts. For through bolts
drill a
5
⁄16" hole.
4. Secure
the base with the bolts.
Figure 9.
Layout penciled in.
The Mortiser represents a
heavy load that must be
lifted from the bottom.
Seek assistance before
beginning assembly.
ASSEMBLY