IG-520-BH-2 5/25/07
5. Place the Bench Support panel first and then place the Bench surface panel into the
sauna room.
※ On larger sauna rooms with more than one bench, rotate the wooden bench supports
away from the side walls.
※ Slide the Bench Support Panel down the wooden supports with the heater facing out.
※ Make sure the two side slots of the Bench Support Panel slide completely into the
corresponding grooves of the wooden supports . (Refer to picture 1)
※ Connect the power connector from the back of Bench Support Panel to the floor
Panel. Ensure the connection is completely fastened(Refer to picture 2)
※ Place the Bench Surface Panel on the Bench Support Panel and slide toward the Back
Wall until half. (Refer to picture 3)
※ Connect the power connector from the back of Bench Support Panel to the Right
Wall Panel. Ensure the connection is completely fastened; attach cover with the
provided screws. (Refer to picture 4)
※ Connect the power connector from the back of Bench Support Panel to the left
Wall Panel. Ensure the connection is completely fastened; attach cover with the
provided screws. (Refer to picture 5)
※ Place the Bench Surface Panel on the Bench Support Panel and slide toward the Back
Wall until flush to the Back Wall.
Picture 1 Picture 2
Picture 3 Picture4-5