Filter
Top Products
Connectin
g
Cables
Connectin
g
to a Compute
r
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use appropriate connection for your computer.
Using the RGB-IN (Analog) connector on the video card.
- Connect the signal cable to the 15-pin, RGB-IN port on the back of your monitor.
[ RGB-IN ]
Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the RGB-IN connection cable.
If the monitor and the computer are connected, you can turn them on and use them.
Connectin
g
USB
Turn on your monitor and PC. If you connect the cable to the connector of your
monitor and the cable to the connector of your PC, the installation programs related
to microphone and camcorder are performed automatically.
You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive
by connecting them to the port of the monitor without connecting them to the PC.
The USB port of the monitor supports High-Speed Certified USB 2.0.
High speed Full speed Low speed