Filter
Top Products
2
Installing your Expandable Gate:
Step 1: Place your expandable gate in an opening no smaller than 26 in. and
no larger than 42in. wide.
Hint- If the opening has a baseboard or molding near the floor, be sure to
place the gate above the molding so that the gate is installed on a vertically
even surface.
Step 2: With one hand on each side of the gate, pull each end of the gate
away from the center, until the gate spans the entire length of your doorway or
opening. As shown in Diagram A.
Note- Hold the outside frame of the gate, NOT the inner round bars. As shown
in Diagram B.
Diagram B
PULL
Diagram A