Filter
Top Products
SAFETY INSTRUCTIONS
• Use the Quinny Moodd for only one child at a time.
• The Quinny Moodd is suitable for children from birth
and up, weighing up to 15 kg (approx. 3.5 years).
• Keep your child and hands away from moving/
folding parts when folding, unfolding or adjusting the
Quinny Moodd.
• Never lift the Quinny Moodd when your child is sitting
or lying in it. Do not use escalators or stairs when your
child is in the Quinny Moodd.
• Do not remove the logos from the fabric cover or frame,
as this could cause damage to these components.
• Only use original accessories and parts that have
been approved by the manufacturer. Do not make any
modications to the product.
• The Quinny Moodd has been approved in accordance
with EN1888:2003 (amendments 1, 2 & 3).
CLEANING AND MAINTENANCE
• Maintain and clean the Quinny Moodd frequently.
• Take care while cleaning the Quinny Moodd. Clean the
frame and plastic parts of the pushchair with a damp
cloth and mild detergent and dry thoroughly. Don’t use
abrasive cleaners on either the plastic section or the
frame or bleach near the fabric covers otherwise this
may cause discoloration or scratches.
• When it is raining, always use the raincover to protect
the fabric cover.
• After using in the rain, wipe the pushchair with a soft,
absorbent cloth.
• Remove the detachable wheels once a month. Clean the
axles and treat them with a dry Teon spray. Never use
Vaseline, grease or silicon lubricants.
• Inate the rear tyres to a maximum pressure of 26 psi
/ 1.8 bar. The tyres are tted with a ‘car tyre valve’. They
can be inated using the pump supplied (in shopping
bag). The valves on the rear wheels can be easily
accessed from the inside of the wheel.
• A punctured inner tube can be repaired in the same way
as a bicycle tyre. Spare inner tubes can be purchased
through your supplier.
• Always deate the tyres when taking the Moodd on an
aircraft, as the air pressure difference could cause the
tyres to burst.
• The brakes may require periodic adjustment. To do this,
use two 8 mm spanners to unlock the lock nut from the
long barrel nut. Adjust the brake cable and retighten the
lock nut. Test the brakes to ensure a positive engagement
and disengagement after adjustment.
WASTE SEPARATION
To help protect the environment, we kindly ask you to
separate the packaging waste from the Quinny Moodd and
at the end of its useful life to separate the components and
dispose it properly.
35