Filter
Top Products
Parts List Warnings
Assembly
Care & Maintenance
Replaceable Parts
Warranty
To Use
Contents
Contenu
Assembly To Use
TM TM
TM
TMTM
TM TM
TM
5
9 continued
Rotate release tab outward,
then squeeze recline button
in all the way (Figure 9).
Lift seat off frame (Figure
9a). NOTE: To flatten the
seat once it is removed from
frame, push in seat pan from
behind seat.
6
8
9
7
9a
10SeatAdapters
NOTE: Seat adapters are
pre-assembled on frame
and must always be in place
to attach seat. Seat adapters
should only be removed
when using the infant car
seat adapters.
To remove adapters, swivel
grey tabs and slide adapters
off (Figures 10-10a).
To reattach seat adapters,
open stroller frame, lift up on
grey tab to expose slots, align
slots with frame, slide adapters
in and push down on grey
tabs
(
Figures 10-10a).
NOTES: Seat adapter labeled
1
fits into frame hub labeled
1
. Seat adapter labeled 2
fits into frame hub labeled
2. Numbered adapters and
frame hubs match up only
when frame is in the open
and in-use position.
10a
10
11FoldStroller
NOTE: Seat must be
removed to fold stroller.
Apply parking brake.
Push release button
(Figure 11). The button will
stay pressed by itself.
11
11a
Push release button
while at the same time
pushing the handlebars
forward (Figure 11a). Pull
up on cross bar to fold if
necessary.
Locate grey pedal. Push
down on pedal and slide
pedal towards front wheels
(Figure 11b).
Push forward to fold
(Figure 11c).
Fasten transport straps around
top of frame (Figure 11d).
11c
11b
Grey
Tab
11d