Filter
Top Products
Parts List Warnings
Assembly
Care & Maintenance
Replaceable Parts
Warranty
To Use
Contents
Assembly
To Use
To Use
2x
2x
2x
2x
8
To avoid serious injury:
• Please refer to the manufacturer’s instructions
for the use of your infant car seat.
• ALWAYS install car seat facing to the rear of
the stroller.
• ALWAYS use the restraint system in the car
seat.
WARNING
2x
16a
16c
16b
16
2x
16e
16d
16 Install Maxi-Cosi Mico
®
and Prezi
®
Infant Car Seats
or Quinny Dreami
TM
Bassinet
Push the parking brake pedal down. Remove the seat.
Insert the adapters into the frame hubs until you hear a “click” (Figure 16).
Each adapter is designed to fit into appropriate side. If adapter does not
fit, try other side.
Car seat and bassinet must be positioned so
that child faces the stroller handle (Figure 16a).
Lower car seat or bassinet into car seat adapters until both sides “click”
(Figure 16b).
Pull up on car seat or bassinet to ensure that it is locked into place
(Figure 16c).
To remove car seat, press both buttons on car seat while lifting car seat
up (Figure 16d). To remove bassinet, press both buttons on bassinet
while lifting bassinet up (Figure 16d).
To remove car seat adapters, press release button and slide adapter off
the frame hubs (Figure 16e).
2x
2x
2x
CAR SEAT
CAR SEAT
CAR SEAT
BASSINET
BASSINET
BASSINET