Filter
Top Products
En
10
3 Deck
5 TEMPO slider
Adjusts the playing speed.
6 Loop half button
! Press:
Set the width of loop playback interval to 1/2 times.
! [SHIFT] + press:
Operations differ depending on the DJ software.*
7 AUTO LOOP mode button
! Press:
Turns the auto loop function on and off.
! [SHIFT] + press:
Operations differ depending on the DJ software.*
8 Loop double button
! Press:
Set the width of loop playback interval to 2 times.
! [SHIFT] + press:
Operations differ depending on the DJ software.*
9 FX1 button
! Press:
Turns effect 1 on and off.
! [SHIFT] + press:
Switches the effect types of FX1.
a FX2 button
! Press:
Turns effect 2 on and off.
! [SHIFT] + press:
Switches the effect types of FX2.
b FX3 button
! Press:
Turns effect 3 on and off.
! [SHIFT] + press:
Switches the effect types of FX3.
c SYNC button
! Press:
Synchronize the track tempo.
! [SHIFT] + press:
Operations differ depending on the DJ software.*
d Jog dial
0 When JOG FX mode is off
— Scratch
When turned while touching a metallic part of the top of the
jog dial, the sound is played according to the direction and
speed at which the jog dial is turned.
— Pitch bend
The playing speed can be adjusted by turning the outer part
of the jog dial during playback.
— Search
When loading a track to each deck, turning the jog dial while
holding down the [SHIFT] button enable move to playback
position at higher speed than scratch.
0 When JOG FX mode is on
— JOG FX control
Effect parameters can be adjusted by turning the jog dial.
e SHIFT button
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
f CUE button
! Press:
Sets a cue point or moves the cue point.
! [SHIFT] + press:
The playing position moves to the beginning of the track.
g Play/Pause button
Use this to play/pause tracks.
h Performance buttons
0 When in hot cue mode
— Press:
Sets the hot cue point.
— [SHIFT] + press:
Delete the hot cue set for that button.
0 When in sampler mode
— Press:
Replays the sample sound.
— [SHIFT] + press:
Operations differ depending on the DJ software.*
i HOT CUE mode indicator
Lights up when the performance buttons are in hot cue mode.
j SAMPLER mode indicator
Lights up when the performance buttons are in sampler mode.
k HOT CUE/SAMPLER mode switching button
Switches the performance button mode to hot cue mode or sampler
mode.
4 Mixer
l MIC VOL control
Adjusts the audio level input to the [MIC] terminal.
m MASTER VOL control
Adjusts the sound level output from the master.
! Not linked to [MASTER] on each DJ software screen.
n EQ (HI, MID, LOW) controls
These adjust the sound quality input to the various decks.
[HI] (treble range), [MID] (middle range), [LOW] (low range)
o HEADPHONES VOL control
Adjusts the audio level output from the [PHONES] terminal.
! Not linked to [VOL] (headphone sound volume control) on each
DJ software screen.
! The sound of the microphone connected to the [MIC] jack is not
output from the headphones.
p HEADPHONES SELECT MASTER button
Monitors the master sound over the headphones.
q HEADPHONES SELECT A/B buttons
Use this to monitor the sound of the respective decks over the
headphones.
r Channel faders
Adjusts the sound level output from the various decks.
s Crossfader
Switches the sound of the decks assigned to the left and right sides
of the crossfader for output.