Philips SCD610 Baby Monitor User Manual


 
12 EN
4 Get started
Charge the parent unit
Note
Make sure your hands and the unit are dry when you
insert and remove the rechargeable battery.
Do as follows to charge the parent unit before

unit indicates that the battery is low.
» 
the video display and the battery on/

Note
If the battery is completely empty, the parent unit
automatically switches off.
The batter Model No. is BL-5C, 1050mAh.
1 To remove the battery door, slide to the
right.
2 Insert the rechargeable battery.
3 Reattach the lid.
4 Insert the plug into parent unit and put the
adapter in a wall socket.
» The battery on/off light on the parent

» When the battery is fully charged, the
battery light turns solid green.
Note

after a long time not being used, switch it off and let it
charge continuously for at least 8 hours.

time, the operating time is less than 7 hours. The
rechargeable battery only reaches its full capacity after
you have charged and discharged it three times.
The battery gradually discharges, even when the parent
unit is switched off.