Filter
Top Products
6
Problem Possible Cause Solution
Unit is not turned on.
AC adapter is not plugged in or
batteries are exhausted.
AC adapter plugged into an
outlet that is not working.
Unit is not turned on.
AC adapter is not plugged in or
batteries are exhausted.
AC adapter plugged into an
outlet that is not working.
Units are too close together.
Volume too high.
Volume control on Parent unit is
set too low.
Units are out of range.
Batteries are low or empty.
Mobile or cordless phones too
close to the baby monitor can
cause interference.
Turn Volume control/Off switch
clockwise (B-3).
Plug in AC adapter or replace
batteries.
If the power socket has a switch,
turn it on.
Push the Power switch (A-4) to
switch on the unit.
Plug in AC adapter or replace
batteries.
If the power socket has a switch,
turn it on.
Move Parent unit away from
Baby unit.
Turn volume control on Parent
unit counter-clockwise.
Turn volume control/Off switch
clockwise (B-3).
Move Parent unit closer to Baby
unit.
Replace batteries or connect to
mains power.
Move the phones away from the
units.
Power light does not light
(Parent unit).
Power light does not light
(Baby unit).
High pitched noise.
No sound.
Power light blinking.
Interference or poor
reception.
PROBLEM SOLVING