Filter
Top Products
Instructions for use
Installation
For use at home
Before connecting the Baby Bottle Warmer to the mains, check to
ensure that the mains outlet is 230V AC.
1. Place the Baby Bottle Warmer out of the reach of children and on a
dry, non-slip, horizontal surface.
2. Turn the click-step control knob 4 to the " " position.
3. Unreel the required cable length from the cable reservoir 8 and
plug into the mains outlet.
For use in the car
1. Place the Baby Bottle Warmer out of the reach of children and on a
dry, non-slip horizontal surface.
2. Turn the click-step control knob 4 to the " " position.
3. Connect the car adapter 9 to the mains plug 3.
4. Unreel the required length of cable from the cable reservoir 8 and
connect the car adapter to the cigarette lighter socket of the car.
(12V DC).
Notes:
– Never use the Baby Bottle Warmer when the car is in motion.
– Never use the Baby Bottle Warmer without water in it.
– Only use the Baby Bottle Warmer when the ambient temperature is
between +7°C and +37°C.
Caution: Change the water in the bottle warmer often for hygienic
reasons.
Operation
Warming of baby bottles
1. Turn the click-step control knob 4 to the " " position.
2. Place the bottle in the container 7 and fill the space between the
bottle and the inner container with water up to two centimetres
from the rim 6. For smaller bottles fill up to just above the milk line
in the bottle.
3. Set the required temperature using the click-step control knob.
– The indicator lamp lights to indicate the heating operation.
4
SBC SC205/215 - page 4
XP SBC SC205/215 29-02-2000 14:03 Pagina 4