Philips AT790 Model Vehicle User Manual


 
Problem Possible cause Solution
The shaver does not
shave as well as it used
to.
The shaving heads are damaged
or worn.
Replace the shaving heads (see chapter
‘Replacement’).
Foam or gel residues clog up
the shaving heads.
Rinse the shaving unit under a hot tap (see
chapter ‘Cleaning and maintenance’).
Long hairs obstruct the shaving
heads.
Clean the shaving heads one by one (see
chapter ‘Cleaning and maintenance’).
You have not inserted the
shaving heads properly.
Make sure that the projections of the
shaving heads t exactly into the recesses
(see chapter ‘Cleaning and maintenance’).
The shaver does not
work when I press the
on/off button.
The rechargeable battery is
empty.
Recharge the battery (see chapter
‘Charging’).
The temperature of the shaver
is too high. In this case, the
shaver does not work.
As soon as the temperature of the shaver
has dropped sufciently, you can switch on
the shaver again.
The shaver does not
work, although it is
connected to the
mains.
The shaver is not designed to
be used directly from the mains.
Recharge the battery (see chapter
‘Charging’) and disconnect it from the mains.
ENGLISH 19