Filter
Top Products
CD Player Auxiliary connection/Alarm
Selecting different play modes:
REPEAT and SHUFFLE
(See 5)
You can select and change the various play
modes before or during playback, and
combine REPEAT modes with program.
SHUFFLE – plays all tracks in random order.
REPEAT – plays the current track
continuously.
REPEAT ALL – plays the entire disc/
program continuously.
SHUFFLE REPEAT ALL – plays the entire
disc/program continuously in random order.
1 To select play modes, press SHUF/REP
once or more.
➜ The selected play mode will be displayed.
2 Press ); to start playback if in the stop
postion.
➜ When SHUFFLE mode is selected, the
disc will play automatically around few
seconds later.
3 To return to normal playback, press
SHUF/REP repeatedly until the various
modes are no longer displayed.
– You can also press 9 once to cancel your
play modes.
Notes:
– During playback, when shuffle mode is
selected, shuffle play will begin only when
playback of current track comes to an end.
– Selection of shuffle mode is not available in
the program mode.
Connecting an external device
You can listen to the sound of the connected
external device through your AJ3915’s
speakers.
1 Press POWER to switch on from standby.
2 Use the supplied line-in cable to connect
AJ3915’s AUX jack to an AUDIO OUT or
headphone jack on an external equipment
(such as CD player, or VCR).
➜ “AU” is displayed.
➜ AUX mode will auto switch on to play the
sound, overriding the active CD or
RADIO mode.
Using the alarm
AJ3915 allows you to simultaneously set two
different alarms (ALARM 1 and ALARM 2 )
which can go off in the CD, radio or buzzer
mode.The clock time needs to be set
correctly before using alarm.
Setting alarm time
1 Press and hold ALARM 1 or ALARM 2
until clock digit(s) for hour flashes.
➜ ALM1 or ALM2 is also displayed,flashing.
➜ It will exit the clock setting mode without
setting if there is 5-second inactivity.
2 Press repeatedly, or hold down ∞/ § to
adjust the hours.
3 Press corresponding ALARM 1 or
ALARM 2 to confirm the hour setting.
➜ The clock digits for minute flash.
4 Press repeatedly, or hold down ∞ / § to
adjust the minutes.
5 Press corresponding ALARM 1 or
ALARM 2 to confirm the setting.
• When CD•RADIO•BUZZER is pushed in
the CD position, selection of CD track
number will be also prompted. Press ∞ / §
to select desired track if you like.
• Repeat the steps above to set and activate
the other alarm if necessary.