Philips 6900LC Model Vehicle User Manual


 
12 ENGLISH ENGLISH 13
C 4 Replace the Razor Head Assembly back on
razor.
Every Two Months: Razor Head
Do not mix up the cutters and combs as the
shaving performance may be adversely affected for
several weeks before optimal shaving performance
is restored.
1 Turn razor to OFF (O) position and
disconnect from outlet.
C 2 Press the Razor Head Release Button (1)
and remove Razor Head Assembly from
the razor unit (2).
C 3 Brush the inside of the razor housing.
4 Turn Razor Head Assembly over so that
underside is exposed.
C 5 Turn wheel of frame counterclockwise.
6 Remove the frame and brush clean.
13
Replace razor head assembly.
Cleaning
Once a week: Razor
Regular cleaning guarantees better shaving
results.
Always switch razor OFF, unplug and remove
power cord before cleaning.
Never clean, remove or replace head assembly
while motor is on.
Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
Do not use razor if combs are damaged or
broken. Facial injury may occur.
Do not use abrasives, scourers or aggressive
liquids such as gasoline or acetone to clean
the razor.
C 1 Clean the top of the razor with the
supplied brush.
C 2 Press the Razor Head Release Button (1)
and remove Razor Head Assembly from
the razor unit (2).
C 3 Brush out hairs from the inside of Razor
Head Assembly and hair chamber.