Filter
Top Products
7
Switch channels
Press • CH +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the •
Numeric buttons .
Press • OK to use the channel grid.
Press •
BACK A/CH on the remote
control to return to the previous channel.
Note
When you use a favourite list, you can only •
select those channels in the list (see ‘Select a
favorite list’ on page 11 ) .
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
1 Press OK .
The channel grid appears. »
2 Press to browse the channel grid
and preview a channel.
The channel content is displayed after »
about two seconds.
3 Press OK to select a channel.
4 Use your TV
This section helps you perform basic TV
operations (see ‘Use more of your TV’ on page
9 ) .
Switch your TV on/off or to
standby
To switch on
If the standby indicator is off, press •
( Power ) at the side of the TV.
If the standby indicator is red, press •
( Standby-On ) on the remote control.
To switch to standby
Press •
( Standby-On ) on the remote
control.
The standby indicator switches to red. »
To switch off
Press •
( Power ) at the side of the TV.
The standby indicator switches off. »
Tip
Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
English
EN
Dali_77_EN_2.indd 7 4/6/2010 11:14:32 AM
Downloaded From TV-Manual.com Manuals