Filter
Top Products
Grasp the baby chair and fix it to
the frame pushing with both
hands till it clicks.
6• The baby chair handlebar can be
adjusted to four heights and can be
lowered pushing the two buttons
on the sides.
7• Inside the car the handlebar must
be fully lowered, as shown in the
figure.
8• Grasp again the car safety belt and
pull it behind the backrest.
9• Insert the belt into the catch
behind the backrest, as shown in
the figure.
10• Make sure that the belt is fully
tight to provide the highest security.
To remove the baby chair, unfasten
the car safety belt from the rear of
the chair, lower the handlebar to
the horizontal position and detach
the baby chair from the frame,
which can be left inside the car,
ready for use.
SAFETY BELT
11• The safety belt for the baby chair is
height-adjustable to three positions.
To choose the position according
to your baby size, unfasten the
belt pushing the red button onto
the buckle and remove the straps
from the rear side.
12• Fasten the safety belt overlapping
the two straps.
13• Insert them into the buckle.
14• Put the child onto the chair and
adjust the belt tightness:
to loosen the belt, push the button
with one hand and adjust the
straps with the other; to tighten
the belt, pull it toward yourself.
SWING CHAIR POSITION
The special frame shape enables
the chair to swing, so that you can
even rock your baby. To fix the
chair, proceed as follows:
15• Swing the handlebar behind the
backrest.
16• Turn the stabiliser feet as shown in
the figure.
17• Example of use inside your house.
TO ADJUST THE HOOD
18• To raise or lower the hood, push
down on the sides with both
hands and raise or lower it till it
clicks.
HEAD GUARDS
19• The car baby chair comes complete
with head guard limiting head
movement as well as protections
for the safety belt.