Filter
Top Products
Accessories / Options
Identifying Controls
Quick Start
Guide
7
Identifying Controls
TV
Mains power On / Off switch
Switch On to turn on the TV●
S VIDEO
AV3 terminals
Headphone
jack
HDMI3
terminal
SD card slot
Function Select
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC mode)
/ Bass / Treble / Balance / Auto Tuning
(p. 20 - 21)
●
Change the channel up/down. When
a function is displayed, press up/down
to adjust the setting of the selected
function. When in standby mode,
switches TV on.
Change the input mode
Attaching the pedestal
Foam mat or thick
soft cloth
Arrow mark
Fix securely with assembly screws. (Total 4 screws)
Tighten screws firmly.
●
●
Holes for pedestal installation
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.●
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
●
●
●
●
●
Power LED
Standby: red
On: green
When using the remote control, indicates the TV has received a
command.
Remote control signal receiver
Do not place any objects between the TV remote control
signal receiver and remote control.
●
●
●
C.A.T.S. (Contrast Automatic
Tracking System) sensor
Senses brightness to adjust
picture quality in “Eco Mode” in
Picture Menu (p. 20)
●