Omega Engineering FMG210 Building Set User Manual


 
The FMG210/220/230 Series are small electromagnetic
low-flow flowmeters with chemically-resistant plastic wet-
ted parts and a choice of Hastelloy or platinum electrodes
suitable for use with a variety of chemicals. Capable of
measuring pulsating flows from diaphragm-type metering
pumps, they are designed primarily for electrically-conduc-
tive chemical injection applications. The 1/4”, 3/8”, and
1/2” sizes monitor maximum flows of 1, 3, and 8 gallons
per minute (or 4, 11, and 30 L/min), respectively. Barb or
NPT fittings are available.
The FMG210/220/230 Series are 12-24 Vdc powered and
come with standard pulse and analog outputs. All electron-
ics are self-contained in a single compact chemically-resis-
tant housing, well suited for OEM applications.
These meters are also appropriate for remote monitoring of
chemical volume or rate using a computer or a PLC.
GENERAL INFORMATION
FEATURES
SPECIFICATIONS
6 ft. control cable
Materials Body
Electrodes
O-Ring
Fittings
Power
Accuracy
Max Fluid Temperature
Maximum Pressure
Minimum Conductivity
Outputs
ABS plastic
Platinum or Hastelloy
Viton™ (EPDM optional)
PVDF plastic
12-24 Vdc, 180 mA
+/-1% of reading, plus .005 gpm (0.02 lpm)
185˚ F (85˚ C)
150 psi (@ 75˚ F)
20 microSiemens
• Frequency opto isolated 1000 pulse/liter (3785 p/g)
• 4-20 mA opto isolated passive
Strain relief
Rugged ABS plastic body
Male NPT or barb pipe ttings,
PVDF plastic
FLOW RANGE
SIZE LOW FLOW CUTOFF MINIMUM FLOW for spec accuracy MAXIMUM FLOW
-025
-038
-050
L/MIN GAL/MIN GAL/HR L/MIN GAL/MIN GAL/HR L/MIN GAL/MIN GAL/HR
.04 .01 .60 .26 .07 4.2 3.8 1 60
.11 .03 1.80 .76 0.2 12 11 3 180
.26 .07 4.20 1.9 0.5 30 30 8 480