Filter
Top Products
®
Page 4
MODELS QTRN080L • QTREN080FL • QTRN110L • QTREN110FL
SERVICE PARTS
99043412B
Key No. Part No. Description
1 97016466 Housing
2 97016449 Duct Connector-4"
3 98010102 Wiring Plate
4 99170245 Screw, #8-18 X .375 (2 req’d)
5 97016584 Wire Panel/Harness Assembly (QTRN080L/QTRN110L)
97016585 Wire Panel/Harness Assembly (QTREN080FL/QTREN110FL)
6 99020284 Blower Wheel
7 99080568 Motor (QTRN080L)
99080561 Motor (QTREN080FL)
99080569 Motor (QTRN110L)
99080563 Motor (QTREN110FL)
8 99100491 Isolator (4 req’d)
9 97016468 Motor Plate
10 99250959 Washer #8 (4 req’d)
11 99260558 Nut, Hex Lock #8-32 (4 req’d)
* 97016621 Blower Assembly (QTRN080L)
* 97016589 Blower Assembly (QTREN080FL)
* 97016622 Blower Assembly (QTRN110L)
* 97016590 Blower Assembly (QTREN110FL)
(includes key nos. 6 thru 11)
12 97016543 Grille Assembly (QTRN080L/QTRN110L)
97016547 Grille Assembly (QTREN080FL/QTREN110FL)
(includes key nos. 13 & 14)
13 99140199 Grille Spring (2 req’d)
14 99111281 Lens
15 99271311 Bulb, 26W Fluorescent (QTREN080FL/QTREN110FL)
16 97016618 Ballast Assembly (QTREN080FL/QTREN110FL)
17 99260488 Nut, Hex #10-24 (2 req’d) (QTREN080FL/QTREN110FL)
18 99111293 Spacer (2 supplied)
SERVICE NOTE
To remove Blower Assembly:
Unplug motor (7).
Remove screw (4) from
motor plate (9) flange.
Find the single TAB on the
motor plate (located next to
the receptacle).
Push up near motor plate tab
while pushing out on side of
housing. Or insert a straight-
blade screwdriver into slot in
housing (next to tab) and
twist screwdriver.
TAB
Order service
parts by “Part No.”
- not by “Key No.”
9. Remove
light lens.
Carefully insert a
small flat-blade
screwdriver
between grille
and lens. Pry
lens out.
8. Push grille
against
ceiling.
10. Install light bulbs.
Fluorescent bulb
supplied with “FL”
models.
Purchase an incandes-
cent bulb for “L” models
- 100W Max.
Purchase a 4W
incandescent night light
bulb.
Insert bulbs into their sockets. Replace lens.
Fluorescent bulb shown