Filter
Top Products
Using the Bedrail
WARNING:
Make sure that your child’s hands are away from
the hinge area before raising and lowering the
Bedrail.
Discontinue use if damaged, broken or if parts are
missing.
TO LOWER THE BEDRAIL:
First, remove contents from the 4 pockets as
well as cups/beverages from the Cup Holder.
Simultaneously lift the Side Locks on either side
of the Bedrail, as shown in Fig. 11, and lower the
mesh panel. Swing the mesh panel all the way
down, as shown in Fig. 12, so that it rests flat
against the box spring.
TO RAISE THE BEDRAIL:
Lift the Bedrail until it is completely upright and
locks into place. You will hear a clicking sound
when it locks into place.
Removing and Collapsing
the Bedrail
Remove all accessories as well as the contents
from the 4 pockets. Remove the Bedrail from the
mattress. To remove the Cross Rails, depress the
locking pin and pull back on the Locking Piece
on the left side of the Cross Rail until it is clear
from the insertion piece. Depress the Locking Pin
on the right side of the Cross Rail and pull the
remainder of the Cross Rail out of the insertion
piece. To break down the Cross Rails, depress
the locking pin and pull the two pieces apart. To
collapse the Bedrail, depress the button on the
top of the Bedrail, as shown in Fig. 13. The button
is located under the top bar, beneath the nylon,
and can easily be activated by squeezing the top
bar. Collapse the legs by lifting the Side Locks up
and pushing the legs down.
Cleaning the Bedrail
Wipe the surface with a damp cloth or sponge
using mild liquid soap. Wipe with clean water and
allow to air dry. Do not immerse in water. Surface
wipe only.
Fig. 12
Fig. 13
Fig. 11
Press button
beneath the top bar
to collapse Bedrail.
6