Filter
Top Products
INSTALLATION & SETUP
Camera Start-Up
1. Connect power cable to Camera’s DC IN jack, then
plug its power supply adapter into wall outlet.
2. Slide [Power Buon] once to turn ON the camera.
NOTE: Use only the 5V/1A power adaptor provided in
the package. To operate without power cable visit
www.getmobi.com to purchase the oponal recharge-
able baery.
Monitor Start-Up
1. Connect power cable to Monitor’s DC IN jack, then
plug its power supply adapter into wall outlet.
2. Press [Power Buon] to turn ON the monitor.
NOTE: Built-in Lithium baery charging process starts
automacally by plugging in the power supply. Please
charge the baery before operang the monitor for por-
table use. Baery indicator will ash red three minutes
before charging is needed.
When [Baery Indicator] lights up red, plug in power
adapter to charge baery.
NOTE: Use only the 5V/1A power adaptor provided in
the package.
8