Filter
Top Products
ADJUSTMENTS
WARNING: SHUTOFF ANDLOCK OUT POWER BEFORE CLEANING, ADJUSTING,LUBRICATING OR
SERVICINGTHIS MACHINE.FAILURETOHEED MAYRESULTIN SERIOUSPERSONALINJURYOR DEATH.
Correct tension on the apron chains is when the apron chain slat is 1/8” to 1/4” off the return slides (three feet
from the front of the box). To tighten chains, tighten the adjuster bolts at each end of the front sprocket shafts. Each
apron chain has its own sprocket shaft. Tighten the adjuster bolts at each end of the shaft equally.
The rollerchain drivesare tensionedby automaticspringloaded tensionblocks. Periodicallytighteners willneed tobe
adjustedto maintainproperspringtension. Springsshouldbe compressed to obtainapproximately5”overall length.
9100 Rear Unload --13--
ADJUSTMENT DIAGRAM
BOTH SIDES
Front Shields Removed To Illustrate Service Components.
Do Not Remove This Shield To Perform The Service.