Filter
Top Products
GB
Warranty
Secure the cover on pins (E4).
Close the buckle (C5) and thread the belts through the belt pads, the cover and the shell (D9).
Attach the shoulder belts to the belt yoke and make sure that the red stitching (x3) on the belt ends and the belt yoke
are facing the shell (D10) – if this is not the case, your belts are twisted – then close the belt guard door (E1).
Fasten the cover all around, behind the pins (E4). Check that it works!
Checklist
For safety’s sake read through this checklist before you set off.
• Check that the harness belt system fits properly and tightly around your child and that the shoulder belts are at the
correct height.
• Check regularly that the belt in the Maxi-Cosi Priori is not damaged. If it is damaged do not use your product in any
circumstances and contact your supplier or importer (see address list on the back of the instruction manual).
• Check that you have secured your Maxi-Cosi Priori properly with the seat belt.
• If you have any questions, please contact your supplier. Make sure that you have the following details to hand:
- serial number underneath on the orange sticker
- make and type of vehicle and seat on which the Maxi-Cosi Priori is used
- age and weight of your child.
Warranty
• The warranty period starts from the date of purchase and is valid for a period of 12 months. The warranty is only
applicable to the original owner and is not transferable. The warranty is only applicable to products that have not
been adapted by the user.
• In the case of any defects, the owner is required to return the product to the retailer. If the retailer cannot solve the
problem, he must return the product, complete with a clear description of the complaint and a validated purchase
receipt to the manufacturer. Exchange or return cannot be demanded. Repairs do not constitute an extension to the
warranty term.
• The manufacturer is not liable for any damages other than those on products supplied or manufactured by Dorel
Netherlands.
• No warranty is given if:
- the product is not supplied complete with the validated purchase receipt to the manufacturer
- defects are caused by misuse or maintenance which differ from that indicated in the instruction manual
- repairs are carried out by third parties
- defects are caused by neglect
- damage or removal of any serial number is found
- if there is normal wear and tear which may be expected from everyday use
- the stated warranty terms and conditions have not been satisfied.
10
Priori 1 SPS GBA HAE 220 bw 17-06-2005 10:26 Pagina 10